You can find it on your Compaq restore Cd. Put your CD in your CD rom drive (assuming that you have installed your drivers and your drive works). Click on My computer and open up your D drive (again assuming that is the name of your CDRom drive). Click on the CPQDRV folder and then on the ICONs folder. Once you have opened ICONs up highlight each folder until you see the gif (little picture) of the Just!Burn software. Once you have found that, write the number of that folder down. Then go back out the where you found the ICONs folder, scroll up and find the folder with the corresponding number to that gif you just found. More then likely it will be the 151580 folder, but again you have to do the above steps to make certain that is where it is. Double click on that folder and it should take you to another folder. That folder will more then likely be the 00D folder (but if it's not, that is ok too..it just should have three digits as a name). Double click on that folder and it will take you to another folder that has a three digit name (probably, but not necessarily 001). Double click on that folder. At that point you will see a Zipped file. Highlight that file and it should say that it's the Just!Burn software. If it does, you have found it! If not, email me and I will try to help you find it.

Next you have to create a new folder so you have somewhere to put it. Open another window in MyComputer and create a new folder on your C drive. I named mine JB. Once you have created the destination folder, you can just highlight that original Zipped file and click copy and then highlight your new folder and click paste. This should move a copy of the software to your harddrive. Once you have done that, you can take that restore cd out of the drive.

You need to unzip the file now. If you don't have an unzip software you can get one at www.hotfiles.com. I use WinZip, but most are good and will work. Unzip the folder..if it asks you what you want to unzip, you want to unzip (or extract) all the files in the folder.
Once unzipped you want to go back to My Computer and open the folder you created. In it it will have a folder called appl.zip. Double click on it. In that folder there are two, one called Burn and one called Install. You want the BURN folder NOT the install one. Double click on the Burn folder. You will see an Icon and named Install. Double click on Install and you are all set.

Oh and by the way. I didn't get this from a new group. I didn't get this from CeQuadrat. I didn't get this from Compaq. NONE of those idiots knew anyting about getting the software back on your pc. I have a little geeky friend that helped me. Good Luck!
M

: my son deleted all the drivers for my cdrw on my compaq Presario model #5900T. Now my cd burner does not work, because the Cequadrat Just!Burn software was not on the restore cd. Compaq.com were of no help. Anyone know where I can get the justburn software? Can I use some other software instead, or am I stuck with a cdrw that doesn't work?

Hi Eric!

I was so glad to see your reply to Christina! I tried the Compaq Support just like you told her, and it did restore the CeQuadrat onto my desk top, but when I clicked on it, a window popped up telling me "CD RECORDER NOT FOUND!!" Then after I pressed ok, it did take me 'in'but the RECORD button which used to be RED is now Grayed out! I can no longer Record music! :( Please Help! Am I supposed to put in the Quick Restore Disk also when going into Compaq Support???

Thanks,
Yasmin

: This is what Compaq has provided me. I hope it works. Hi Eric,

: The simple answer is click start \ compaq support \ compaq quick restore or SELECTIVE whichever you have listed \ you will see various applications one of which should be just burn, just double click it to reinstall.

: in the event that it is missing from your selective restore - this is a little more complicated (if this fails, you can request that we send you sp12233)

: For the following it gets a little complicated - call in if you need support

: QRIA Commands (Manual Software Load Commands)
: Click on Start
: Click on My Computer
: Double click on (D:) drive
: Double click on the CPQDRV folder
: Double click on the ICONS folder
: Highlight each .gif file until the gif that represents the desired application or driver is found
: Example Just Burn 151580-00D-001

: Write down the six digit name of the gif file
: Example (just burn = 151580)
: Click on the Back button on the toll bar
: Double click on the numbered folder that corresponds to the number recorded in the previous step
: This will display another folder which will be 3 digits in length. Write this folder name down.
: Example (B2A- you will need to double check this)
: Double click this folder to display the final folder name required write this folder name down as well
: Example (003 - double check this also)
: Close all open windows
: Click on Start
: Click on Run
: In the "Open" field type C:\CPQS\QUICKSR\QRIA (first 6 digit number written down)-(second 3 digit alphanumeric number)-(third 3 digit alphanumeric number)
: Example: C:\CPQS\QUICKSR\QRIA 151308-B2A-003

: Yes, You can use any kind of cd-burning software you like. I now use Easy CD Creator5. When I first got my Compaq, I called the company and insisted they send me the software, just for this reason.

but easy cd creator 5 uses direct cd wich is not suported by older burners.. if you have a way to get it to recognise my burner plz let me know

: : I had to use Quickrestore on my Presario. Now my cd burner does not work, because the Cequadrat Just!Burn software was not on the restore cd. So what I'm Suppose to do And How I get it to work.