: I'm currently using a virtual turn tables program to mix mp3s
: What I want to do is record the mixes that I make as wav files
: but when I try to my it says wave device already in use
: This really sucks but I heard there are drivers for the AWE 64
: out there that would fix this. Let me know if you have any ideas
: or links for me.

:
: Matt

Right, here's the deal. If you want to record the output from your MP3 DJing program to wav and you don't have one that has built in recording, forget about utilities like Total Recorder and Virtual Cable. Total Recorder seems to have problems recording the output of other programs unless you can set the output sound device to Wave Mapper or Automatic. Most MP3 mixing programs won't let you do that. If your program does let you set the main output to either Wave Mapper or Automatic, then you can probably use Total Recorder. Virtual Cable has enough of a delay between the input and output devices that in most programs I noticed a slower response time when pressing play. I don't know about the rest of you, but I'm a bit of a perfectionist. The quality of MP3 has enough problems that I don't like the idea of using an analogue connection between two sound cards either. So after a lot of frustration, I finally figured it out. Here's what you have to do. Step 1: First you need at least one duplex sound card. Not much of a problem most of them are these days. Set your programs main output to a duplex sound card and the headphones to a second one if you have one. Step 2: Go into Control Panel under the Start Menu under settings. Open Multimedia. In the Audio Tab check to see if the Sound Card you set as the main output in your DJ program is the selected Playback device. Step 3: Click on the Playback button. If in step 2 the card you set as your main output in your program was the selected Playback device, make sure that Wave is selected and that the volume is set to something reasonable. It should say Wave or Wave/DirectSound or something like that. If you don't see it or if in step 2 the card you selected as your main output in your program wasn't the selected Playback device, click on the Options Menu, click on Properties, select the Mixer Device for the sound card you set as the main output for your program and make sure Adjust volume for Playback is selected. In the list select Wave or Wave/DirectSound and click OK. Now you should see it. Make sure it's selected and set the volume. Then close the Play Control window. Step 4: In the Audio Tab check to see if the Sound Card you set as the main output in your DJ program is the selected Recording device. Step 5: Click on the Recording button. If in step 4 the card you set as your main output in your program was the selected Recording device, make sure that Wave is selected and that the volume is set to something reasonable. If you don't see it or if in step 4 the card you selected as your main output in your program wasn't the selected Recording device, click on the Options Menu, click on Properties, select the Mixer Device for the sound card you set as the main output for your program and make sure Adjust volume for Recording is selected. In the list select Wave. Warning! If you don't have a duplex sound card you may not see it listed. Click OK. Now you should see it. Make sure it's selected and set the volume. Then close the Record Control window. Click OK to close Multimedia Properties and then close Control Panel. Step 6: Run your DJ program and a recording program. In your recording programs options set the recording device to the same one as the main output for your DJ program. If your recording program doesn't allow you to set the sound devices internally )most of them do), you'll have to set the sound card you selected in your DJ program as your Recording Preferred device in Multimedia. Start recording and what you mix should be recorded. Some mixing programs will take over your sound card. In this case you'll either have to wait until you close your DJ program to playback what you've recorded or you'll have to set your recording programs output to another device internally or in Multimedia.

: I'm currently using a virtual turn tables program to mix mp3s
: What I want to do is record the mixes that I make as wav files
: but when I try to my it says wave device already in use
: This really sucks but I heard there are drivers for the AWE 64
: out there that would fix this. Let me know if you have any ideas
: or links for me.

:
: Matt

: I'm currently using a virtual turn tables program to mix mp3s
: What I want to do is record the mixes that I make as wav files
: but when I try to my it says wave device already in use
: This really sucks but I heard there are drivers for the AWE 64
: out there that would fix this. Let me know if you have any ideas
: or links for me.

:
: Matt

: I'm currently using a virtual turn tables program to mix mp3s
: What I want to do is record the mixes that I make as wav files
: but when I try to my it says wave device already in use
: This really sucks but I heard there are drivers for the AWE 64
: out there that would fix this. Let me know if you have any ideas
: or links for me.

:
: Diego

If you guyz find out a soultion ,, please inform me
i have a CD-R driver and i wanna record mp3's to disc but i could only record wavs..

Thanx

: I'm currently using a virtual turn tables program to mix mp3s
: What I want to do is record the mixes that I make as wav files
: but when I try to my it says wave device already in use
: This really sucks but I heard there are drivers for the AWE 64
: out there that would fix this. Let me know if you have any ideas
: or links for me.

:
: Matt
Hey Matt,
I was trying this as well and I need the same info. If you
find a way to do so, please e-mail me.

I will also e-mail you if I find it.